Seiwa Si-Tex MDA3 - Manual (Page 7)

Page 4
About your AIS antenna splitter
2.2 What's in the box?
Figure 1 shows the items included with your AIS antenna splitter purchase. The following sections give a brief overview of each item.
Please ensure all items are present and if any of the items are not present contact your dealer.
Figure 1 Items included with the product
• Quick start guide
The quick start guide gives a handy one page reference for the installation process.
•
Product manual
The product manual is this document and should be read thoroughly prior to any attempt to install or use the AIS antenna splitter.
•
VHF radio connection cable
This cable is used to connect a VHF radio to the AIS antenna splitter. The cable has PL259 connectors at either end and requires a
SO239 connector on the VHF radio. If your VHF radio does not have a SO239 connector please contact your dealer for details of
suitable adaptors.
•
AIS transceiver connection cable
This cable is used to connect an AIS transceiver to the AIS antenna splitter. The cable has a BNC connector at one end (for connection
to the AIS antenna splitter) and a PL259 connection at the opposite end (for connection to an AIS transceiver with an SO239 VHF
connector). If your AIS transceiver does not use an SO239 connector please contact your dealer for details of suitable adaptors.
Screws
(packet of 4)
Product manual
AIS antenna splitter
Power and FM cable Accessory cables ( x2)
Warranty
information
Quick
start guide
Product CD