Airlink101 AICN1777W User Manual
Page 33
- 32 -
Video & Audio >> Video
MPEG4
-
Video Resolution: Select the desired video resolution from the three formats: VGA, QVGA and
QQVGA. The higher setting (VGA) obtains better video quality while it uses more resource within
your network.
-
Video Quality: Select the desired image quality from five levels: Lowest, Low, Medium, High,
and Highest.
-
Frame Rate: Select Auto or a proper setting depending on your network status.
MJPEG
-
Video Resolution: Select the desired video resolution from the three formats: VGA, QVGA and
QQVGA. The higher setting (VGA) obtains better video quality while it uses more resource within
your network.
-
Video Quality: Select the desired image quality from five levels: Lowest, Low, Medium, High,
and Highest.
-
Frame Rate: Select Auto or a proper setting depending on your network status.
NOTE
The camera supports both MPEG4 and MJPEG compression. MJPEG capture the
images in JPEG format, which require higher bandwidth to view smooth video. The administrator
can control the bandwidth of each connection well through the setting options above. For the
bandwidth information, refer to the Appendix A.3, Bandwidth Reference Guide.
3GPP
-
Disable: Disable access from mobile device.
-
3GPP Without Audio: Select this option to view the camera from your mobile device without
audio.
-
3GPP With Audio: Select this option to view the camera from your mobile device with audio.
If you use a mobile device, you can also view the real-time streaming image captured by the
camera on your phone with the default (built-in) player by entering the RTSP link:
rtsp://(IP address
of the camera)/3gp
.
NOTE
Your mobile phone and the service provider must have data service. Please contact your
service provider when you are failed to use this service.