Airlink101 AICN1777W - Manual (Page 53)

- 52 -
5. The information of the camera will be displayed on the window. When completed, click Preview and
then click Save to return to the Device Setting window. The added camera will be displayed in the
Device List.
Option Description
Camera
Title You have to assign a descriptive name for the
camera.
IP
Address Display the IP address of the camera.
Port Display the port path of the camera.
Account Display the user name for accessing the camera.
Password The password for accessing the camera will not be
displayed.
Stream Select the stream type as MPEG4, MJPEG, or H.264.
(MPEG4 and H.264 is not supported by this model)
Record Select Yes or No to set up recording function of the
camera.
Preview
Window This window allows you to preview the image of the
camera. Click Preview to view the image; click
Disconnect to stop previewing.
TIP You cannot set the motion detection area while adding the new camera. To set the motion
detection area of the camera, select the desired camera and click the Modify button on the
Device Setting window. Please refer to the following section 4.5.