Seiwa Black Box 1000W 50/200kHz - Manual (Page 18)

20 User Manual
2.4 SOUNDER ADJUSTMENTS WITH SOFT KEYS
When the Fish Finder page is active, by pressing one of the Soft Keys, the main
functions to adjust the Fish Finder are shown on the Soft Keys labels on the
screen. The Soft Keys labels disappear automatically if no keys are pressed after
5 seconds or by pressing [CLEAR].
The G
AIN
Soft Key
By pressing [G
AIN
] the Gain changes between AUTO GAIN and MANUAL GAIN.
If MANUAL GAIN, use the cursor left/right to adjust it: a bar with the % symbol is
displayed on the screen above the [G
AIN
] label.
If AUTO GAIN, use the cursor left/right to adjust the Gain Offset: a bar with the %
symbol is displayed on the screen above the [G
AIN
] label.
The STC Soft Key
The [STC] changes the STC value between OFF/SHORT/MID/LONG. The current
value of STC is shown on a window right over the [STC] label.
The R
ANGE
Soft Key
By pressing [R
ANGE
] the window switches to the next RANGE status: MANUAL,
BOTTOM LOCK and AUTO.
If MANUAL, use the cursor up/down to adjust the Depth value by 10ft time and
use the cursor left/right to adjust the Shift. When in meters the step is 2 meters
and it increases to 10 meters when the key is pressed for more than 1 second.
If BOTTOM LOCK, use the cursor up/down to adjust the Bottom Range value by
10ft at a time.
If AUTO RANGE, the range value is set automatically by the ES and it cannot be
changed by the user.
The F
REQ
Soft Key
By pressing [F
REQ
] it is possible to select the Frequency to which the Sensitivity
parameters are applied.
This option is available only in the Dual Frequency page.
2.5 INFO ON FISH FINDER: SYSTEM INFORMATION
If you want to know information about the Fish Finder connected, follow the
procedure:
[MENU] + "About..." + [ENTER]
A window will be shown with the desired information on the Fish Finder Library
row and on the Fish Finder module row.
XXXX V. X.yy R [GG/MM/YYYY]
V2.1.333.2000 B [18/01/2009]
Fig. 2.5 - System Information page