TotalPond LLUV1050 - Manual (Page 4)

4
3. Remove the front cover from the pump. Fig. 8
Fig. 8
4. Remove the impeller cover to expose the impeller assembly.
Remove the impeller assembly by gently pulling on the impeller
blades. Use a soft cloth or brush to clean the impeller assembly
and inside of the impeller housing. Fig. 9
Fig. 9
5. Remove the locking screw, which is located on the bottom of the
pump. Fig. 10
Fig. 10
6. Remove rear cover by gently pressing on the sides and pulling it
away from the pump. Fig. 11
Fig. 11
7. Remove the light cover from the pump by turning it
counterclockwise and pulling it away from the pump. Fig. 12
Fig. 12
Press
here