TotalPond LLUV1050 - Manual (Page 5)

5
8. Note: In the unlikely event the UV bulb needs replacing, remove
glass tube by turning the glass tube assembly counterclockwise
and pulling away from the lamp base. Gently the pull bulb straight
apart from the bulb socket and insert the replacement bulb in the
reverse manner. Fig. 13
Fig. 13
9. Clean the exterior of the UV glass tube with warm soapy water.
Fig. 14
Fig. 14
10. Reassemble all of the components. Fig. 15
Fig. 15
CARE AND MAINTENANCE
•
Clean the pump regularly depending upon the environment in which it is operated. Clean the pump
when it is visibly soiled or when a drop in performance is detected.
•
Before cleaning, always disconnect the pump from the power source.
•
Remove all parts from the pump and clean in warm, soapy water.
•
Remove any large debris from pump barrier bag. Use a garden hose to rinse off any other dirt
from the pump barrier bag.
Clean with soap