Axis Communications 2420 W/Lens - Manual (Page 26)

Configuring Your Camera AXIS 2420 User’s Manual 26
Modem
The Modem page allows you to set your specific modem type and configure it, using the
following parameters:
• Disable incoming calls - use this only if you will not need to dial-in to the AXIS 2420.
• Modem Type - set the brand of modem and provide a specific Initstring, if required.
• Communication Settings - advanced settings for your modem. Please see the documentation
for your modem.
• Callback - use this to get your modem to return your call. The number of ring signals to wait
before callback and the number of seconds to wait before disconnecting can both be set.
ISP
This page provides the fields for entering the information specific to your own ISP. If your
own ISP is not listed, use the Generic setting. The settings available are; the number you
dial to your ISP, your user name and password, the connection type and the re-dialing
properties. You can save on phone bills by setting the connection type to Closes After or
Optimized. See the on-line help for more information.
Using Pan-Tilt-Zoom Devices
There is a wide range of Pan-Tilt-Zoom (PTZ) devices available on the market today. Some
of these can be used with your AXIS 2420 to provide a simple means of remotely aiming
and controlling your camera. A PTZ device connects directly to the AXIS 2420 via the
RS-232 port or RS-485/422 port on the back panel of the camera. Both ports support the
use of these devices, but only one port at a time can be used for the purpose.
Apart from the COM settings shown by default for the COM ports, selecting External
Device for the port will also reveal a section called Pan Tilt Settings. The drop-down list
allows you to select the driver for your PTZ device. The devices in the list are the ones
currently supported by the AXIS 2420. For the latest information concerning supported
PTZ drivers, please see the Axis Web at www.axis.com.