Setting and starting a programme, Interrupt a programme, Cancel a programme – AEG L 75280 FLP User Manual

Page 16: Change a function, Set the delay start

Advertising
background image

4.

To use liquid detergent, turn the flap
down.

With the flap in the position
DOWN:
– Do not use gelatinous or thick

liquid detergents.

– Do not put more liquid deter-

gent than the limit showed in
the flap.

– Do not set the prewash phase.
– Do not set the delay start func-

tion.

5.

Measure out the detergent and the
fabric conditioner.

6.

Carefully close the detergent dis-
penser. Make sure that the flap does
not cause a blockage when you close
the drawer.

SETTING AND STARTING A PROGRAMME

1.

Turn the programme knob. The rela-
ted programme indicator comes on.

2.

The indicator of button

4

flashes

with red colour.

3.

The display shows the default tem-
perature and spin speed. To change
the temperature and/or the spin
speed, press the related buttons.

4.

Set the available functions. The indi-
cator of the set function comes on or
the display shows the related symbol.

5.

Press button

4

to start the pro-

gramme. The indicator of button

4

is on.

The appliance adjust automat-
ically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.

INTERRUPT A PROGRAMME

1.

Press button

4

. The indicator flash-

es.

2.

Press button

4

again. The washing

programme continues.

CANCEL A PROGRAMME

1.

Press button

1

to cancel the pro-

gramme and to deactivate the appli-
ance.

2.

Press button

1

again to activate the

appliance. Now, you can set a new
washing programme.

The appliance does not drain the
water.

CHANGE A FUNCTION

You can change only some functions be-
fore they operate.

1.

Press button

4

. The indicator flash-

es.

2.

Change the function set.

SET THE DELAY START

1.

Press button

5

again and again until

the display shows the number of mi-
nutes or hours. The related symbols
comes on.

2.

Press button

4

, the appliance starts

the countdown of the delay start.
When the countdown is completed,
the programme starts automatically.

16 www.aeg.com

Advertising