Mobile Video HDD HV356T - Manual (Page 32)

PC Operation
28
Software Installation
1. Do not connect the Mobile Video HDD to computer yet.
2. Insert the utility CD into computer’s optical drive, and then the installation window should
automatically appear on the screen. If the installation window doesn’t show up, go to “My
Computer” and browse the CD. By executing the “autorun.exe” file, the installation window
will appear.
3. Click on “Install Driver and Utility”, and then follow the on screen instructions for
installation.
4. After the software had been successfully installed, see “Connecting to PC” for cable
connection.
Connecting to PC
Connecting with USB 2.0 Interface
1. Connect the plug of AC adapter to the connector marked “DC IN”, plug the other end into
an electric outlet.
2. Connect the USB cable to the USB connector. Then connect the other plug to computer’s
USB 2.0 port.
3. Press the Power switch and then the blue LED will light up.
4. The computer will detect the Mobile Video HDD and you can start accessing the drive.
Connecting with eSATA Interface (dual connection model only)
1. Connect the plug of AC adapter to the connector marked “DC IN”, plug the other end into
an electrical outlet.
2. Connect the eSATA plug to the eSATA connector. Then connect the other plug to
computer’s eSATA port.
n
p
o