Mobile Video HDD HV356T - Manual (Page 6)

About the Remote Control
2
Take out the Remote Control
n: Push the bottom of remote forward.
o: The remote will be released from the
stand.
n
o
About the Remote Control
How to Take and Store the Remote Control
This device is designed with a remote control storage compartment at the bottom. You can
store the remote control in the compartment to avoid misplacing.
By offering the Part Number of the Remote Control, you can purchase a new one from our
dealer if it is missing. The Part Number of the Remote Control: 7900035-51
Using the Remote for the First Time
For the first time use of the remote, see the illustration
shown alongside. Pull out the tab to enable the battery
power of the remote.
Changing the Battery of Remote
If the battery becomes depleted, change the battery
according to the following instructions:
1. Turn the remote control on its back, and then press the tab on the left side with
fingernail n . Hold and pull at the indentation o to take out the battery unit.
2. The battery model of this remote is [CR2025]. Refer to the illustration below to insert the
battery accurately with the positive side facing up – see illustration below.
3. Place the new battery and make sure it is inserted and seated securely.
Load the new battery
(+ towards up)
Insert the battery holder Take out the battery holder
n o
Pull out the tab
Store the Remote Control
p: With the buttons facing up, insert the
top of remote and push it forward.
q: Push the bottom of remote to fix it.
p
q