Ariens 924124-ST926DLE - Manual (Page 10)

GB - 10
Install Discharge Chute (924124-128,
335-338, 516)
Figure 5.
1. Grease underside of discharge chute ring
(if not already greased).
2. Remove mounting hardware from auger
housing.
3. Install discharge chute over opening in the
auger housing and secure pedestal to
auger housing with hardware removed in
step 2.
Install Discharge Chute Crank
1. Slide chute crank rod through the opening
in control panel, through the upper hole in
the bracket under panel and out the hole
in the front panel.
2. Align chute crank rod with the pinion gear
or universal joint (if so equipped) on chute
and fasten with spring clip. Install Discharge Chute (924517)
1. Remove chute motor cover from chute
motor (Figure 7).
1. Handlebar
Assembly
2. Wing Knobs
3. Wing Nut
4. Speed Selector
5. Bolt
6. Shift Rod
1
2
4
5
6
Figure 4
3
OS3020
2
Figure 5
1. Mounting
Hardware
2. Discharge
Chute
3. Chute Pedestal
4. Discharge
Chute Ring
1
1
3
2
OS6610
OS6620
4
Figure 6
1. Spring Clip
2. Chute Crank Rod
1
OS0001
2