Ariens 924124-ST926DLE User Manual

Page 6

Advertising
background image

GB - 6

SAFETY DECALS AND
LOCATIONS

ALWAYS replace missing or damaged Safety
Decals. Refer to figure below for Safety Decal
locations.

1. DANGER!

2. WARNING!

3. DANGER!

SAFETY RULES

Read, understand, and follow all safety
practices in Owner/Operator Manual before
beginning assembly or operating. Failure to
follow instructions could result in personal
injury and/or damage to unit.

ALWAYS remove key and/or wire from spark
plug before assembly, maintenance or service.
Unintentional engine start up can cause death
or serious injury.

Complete a walk around inspection of unit and
work area to understand:

• Work area • Your unit • All safety decals

ALWAYS check overhead and side clearances
carefully before operation. ALWAYS be aware
of traffic when operating along streets or
curbs.

Keep children and people away. Keep children
out of work area and under watchful care of a
responsible adult.

NEVER allow children to operate or play on or
near unit. Be alert and shut off unit if children
enter area.

DO NOT allow adults to operate unit without
proper training.

ROTATING PARTS.
Keep clear of auger while engine
is running.

• Read Operator’s Manual.
• Allow operation only by

properly trained adult, never
children.

• Stop engine and remove

ignition key prior to leaving
the operator’s position for any
reason.

• Keep all controls, guards and

safety devices properly
serviced and functional.

• Never direct discharge

towards persons or property
that may be injured or
damaged by thrown objects.

Read Owner/Operator Manual.

Keep people away from unit while
operating. Keep children out of
work area and under watchful
care of a responsible adult.

OS6600

1

2

3

Figure 2

OS2080

OL1801

Never direct discharge towards
persons or property that may be
injured or damaged by thrown
objects.

Stop engine, remove key, read
manual before making any
repairs, adjustments.

Wear appropriate hearing
protection.

ONLY use clean-out tool to clear
blockages. NEVER use your
hands.

ROTATING PARTS! ONLY use
clean-out tool to clear blockages.
NEVER use your hands. High
speed impeller rotates below
discharge opening. Wait for all
moving parts to stop before
removing clogs or servicing.

OL0910

OS6610

Advertising