Acer V.32bis - Manual (Page 11)

10
\N6 V.42/MNP/Normal data link
\Q_ \Q0 Turn off flow control
\Q1 XON/XOFF software flow control
\Q2 CTS signal unidirectional hardware flow
control
\Q3 RTS/CTS signal bi-directional hardware
flow control
\Q4 XON/XOFF unidirectionl flow control from
modem
\Tn Inactivity timer, where n = 0 to 90 minutes.
Default is 0
\V_ \V0 Do not send extended responses
\V1 Send extended response set 1
\X_ \X0 Process XON/XOFF but don’t pass through
\X1 Process XON/XOFF and pass through
#CC_ #CC0 Caller ID disabled
#CC1 Formatted Caller ID (Date, Time Number)
#CC2 Unformatted Caller ID
3.6 Fax Class 2 Commands
+FAA=n Data/Fax auto answer enable. Default is 0
+FBOR Data Bit Order
+FBUF=? Buffer Size
+FBUG Session Message Reporting Parameter
+FCIG Report Remote ID Response, CIG
+FCFR Confirmation to Receive Prompt
+FCLASS Service Class Identification and Control
+FCON Facsimile Connection Response
+FCR Capability to Receive
+FCSI Report Remote ID Response Called Station
+FCSIG=n Local Polling ID String
+FDCS:<string> Report Session Response
+FDCC=n
DCE Fax Capabilities Parameters
+FDIS:<string> Report Remote Capabilities Response
+FDIS=n
Current Session Negotiation
+FDR Receive Phase C Data
+FDT[=]n Transmit Phase C Data
+FDTC: Report Remote Capabilities Response
+FET: Post Page Message Response
+FET=n End the Page or Document
+FHNG Call Termination Status Response
+FHR: Report Received HDLC Frame Response
+FHT: Report Transmitted HDLC Frame