Acer V.32bis User Manual
Page 7
6
P
pulse dialing
T
touch-tone dialing
W
wait for second dial tone
,
pause
@ wait for five seconds of silence
!
flash
;
return to Command Mode after dialing
:
return to Command Mode after dialing
and maintain connection
DS=n
Dial one of the four telephone numbers (n=0-
3) stored in the modem’s non-volatile memory
E_
E0
Commands are not echoed
E1
Commands are echoed
+++
TIES Escape Characters - Switch from Data
Mode to Command Mode
H_
H0
Force modem on-hook (hang up)
H1
Force modem off-hook (make busy)
I_
I0
Display 14400
I1
Display 000
I2
Internal memory test
I3
Firmware revision number
I4
Configuration settings
I6
DSP
L_
L0
Low speaker volume
L1
Low speaker volume
L2
Medium speaker volume
L3
High speaker volume
M_
M0
Internal speaker off
M1
Internal speaker on until carrier detected
M2
Internal speaker always on
M3
Internal speaker on until carrier detected and
off while dialing
N_
N0
Line speed set by register S37.
N1
Originate with automatic rate negotiation
starting at S37 setting, answer at any speed.
N2
Adds V.23 to N1
N3
Originating line speed set via register S37
N4
Same as N3
N5
Originate with automatic rate negotiation
starting at S37 setting, Anwer only at S37
setting
O_
O0
Return to Data Mode