Alpine TME-M790 - Manual (Page 19)

FR
ES
DE
SE
IT
17
-EN
Attaching the AV-Interface Unit
When attaching with Velcro TM Tape, be sure to
choose a level location.
Do not attach in a location where the AV-
Interface unit is upside down.
Attach the AV-Interface Unit.
Attach the Velcro
TM Tape included with the AV-
Interface Unit and secure the unit under the
passenger seat, for example.
TME-M790
FOOT BRAKE
(Yellow/Black)
Foot brake lamp
Foot brake lead Pinch Connector
Pinch Connector
Parking brake lead
Parking brake lamp
Parking brake switch
Foot brake switch
Battery
Chassis
(Yellow/Blue)
PARKING BRAKE
Battery
(Red)
SPST SW (Optional)
(Yellow)
TME-M790
(Monitor)
IGNITION
BATTERY
AUX OUTPUT AUDIO
VIDEO
NA VIGA
TION
R
L
AUX INPUT 1 AUDIO
VIDEO
R
L
AUX INPUT 2 AUDIO
VIDEO
DISPLA
Y OUTPUT
(MONO)
(MONO)
R
L
Velcro TM Tape (Included)
If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc.
Vehicle Cable
Stopper
Monitor Cable
Pinch Connector
Plier
Foot Brake Lead/Parking Brake Lead Connection
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
NOTE
If your vehicle has no ACC power supply, add an SPST
(Single-Pole, Single-Throw) switch (sold separately).
If the switched power (ignition) lead of the TME-
M790 is connected directly to the positive (+) post of
the vehicle’s battery, the TME-M790 draws some
current (several hundred milliamperes) even when its
switch is placed in the OFF position and the battery
may be discharged.
1 2