Alpine TME-M790 - Manual (Page 20)

18
-EN
Installation and Connections
Monitor
Battery
White/Brown
To remote input lead.
To remote input lead.
To the foot brake cord or brake lamp cord.
To the parking brake signal lead.
Ignition key
Connect to an IN INT compatible product.
White/Brown
Pink/Black
Yellow/Black
Red
Black
Yellow
Yellow/Blue
1
1
2
3
4
5
6
7
8
8
AUX OUTPUT
AUDIO VIDEO NAVIGA TION R L
AUX INPUT 1
AUDIO VIDEO R L
AUX INPUT 2
AUDIO VIDEO
DISPLA
Y OUTPUT
(MONO) (MONO)
R L
REMOTE OUT
AUX1
REMOTE OUT
AUX2
AUDIO
INTERRUPT OUT
FOOT BRAKE
PARKING BRAKE
IGNITION
BATTERY
GND
Connections
1 Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input
lead. This lead outputs the controlling signals
from the remote control.
2 Foot Brake Lead (Yellow/Black)
Connect to the vehicle’s foot brake lead or brake
lamp lead.
3 Parking Brake Lead (Yellow/Blue)
Connect this lead to the power supply side of the
parking brake switch to transmit the parking
brake status signals to the TME-M790.
4 Audio Interrupt Out Lead (Pink/Black)
5 Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the
vehicle’s fuse box or another unused power
source which provides (+) 12V only when the
ignition is turned on or in the accessory position.
6 Battery Lead (Yellow)
Connect this lead to the positive (+) post of the
vehicle’s battery.
7 Ground Lead (Black)
Connect this lead to a good chassis ground on
the vehicle. Make sure the connection is made to
bare metal and is securely fastened using the
sheet metal screw provided.
8 Fuse Holder (5A)
To prevent external noise from entering the
audio system.
• Locate the unit and route the leads at least
10cm away from the car harness.
• Keep the battery power leads as far away from
other leads as possible.
• Connect the ground lead securely to a bare
metal spot (remove the coating if necessary) of
the car chassis.
• If you add an optional noise suppressor,
connect it as far away from the unit as possible.
Your Alpine dealer carries various Alpine noise
suppressors, contact them for further
information.
• Your Alpine dealer knows best about noise
prevention measures so consult your dealer for
further information.