Kodak V1073 - Manual (Page 57)

Troubleshooting
www.kodak.com/go/support 51
Computer/connectivity problems
Battery life is short ■ Make sure the correct battery type is installed (see page 61 ).
■ Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera.
■ Insert a new or charged battery (see page 1 ).
You cannot take a
picture ■ Turn the camera off, then on again.
■ Depress the Shutter button all the way (see page 7 ).
■ Insert a new or charged battery (see page 1 ).
■ Memory is full. Transfer pictures to the computer (see page 42 ),
delete pictures (see page 17 ), or insert another card.
Error message appears
on LCD ■ Turn the camera off, then on again.
■ Remove the memory card.
■ Turn off the camera. Remove the battery. Wipe the contacts with
a clean, dry cloth.
■ Insert a new or charged battery.
■ If the problem still exists, get help (see page 54 ).
Memory card not
recognized or camera
freezes with card ■ Card may be corrupted. Format the card in the camera ( see
page 38 ).
■ Use another memory card.
Cannot find the
desired picture/video ■ To view pictures on a card or in internal memory, see page 16 .
Status Solution
Pictures do not
transfer to computer ■ See Help in EasyShare software.
Slide Show does not
run on an external
video device ■ Adjust the camera Video Out setting to NTSC or PAL ( see
page 37 ).
■ Make sure the external device settings are correct. (See the
device’s user’s guide).
Status Solution