Transfer pictures failure, User guide on the cd is obsolete, Wrong paper size – Kodak ESP 5 User Manual

Page 52

Advertising
background image

All-in-One Troubleshooting

46

Kodak ESP 5 Printer User Guide

Corrective Action

Turn the printer off and turn it back on

If the problem persists, unplug the power cord from the power supply and plug it back in

If the problem continues to persist, restart your computer

Transfer Pictures Failure

Problem

Nothing happens when you try to transfer photos to the computer.

Corrective Action

Remove the memory card or USB device and reinsert it

Check the power connection to the computer

If you are trying to transfer photos from a memory card and a PictBridge camera is
connected, disconnect the camera

Close unnecessary software applications, and minimize remaining application windows.
Follow any messages on the screen that may have been hidden by other windows

Disconnect then reconnect the USB cable from the printer to the computer

Make sure you are using a high-quality USB cable (See “No Communication With
Computer” on page 44)

Make sure your computer meets the minimum system requirements for using your
printer (see ““General Troubleshooting” on page 41). Upgrade your system if necessary

User Guide on the CD Is Obsolete

Probable Cause

The User Guide has been updated since the software CD was released.

Corrective Action

Download the most recent version of the User Guide from Kodak.com.

Wrong Paper Size

Probable Cause

The print size or paper size you selected may be larger or smaller than the paper found in
the paper tray.

Corrective Action

1

Replace the paper in the paper tray with the correct size.

2

Press

OK

.

If the situation continues, contact Kodak support.

Advertising