Ic radiation exposure statement, Canadian doc statement, German compliance statement – Kodak ESP 5 User Manual
Page 75
Appendix B
Kodak ESP 5 Printer User Guide
69
This device has been designed to operate with an antenna having a maximum gain of
1.8dB.
Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The
required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the EIRP is not more than required for successful communication.
IC Radiation Exposure Statement
IMPORTANT NOTE:
This equipment complies with IC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
Canadian DOC Statement
DOC Class B Compliance—This Class B digital apparatus complies with Canadian ICES-
003.
Observation des normes-Class B—Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
German Compliance Statement
Noise emissions for this equipment do not exceed 70 dBa.
This equipment is not intended for use in the work place in accordance with BildscharbV
regulations.
"Das Gerät ist nicht für die Benutzung am Bildschirmarbeitsplatz gemäß BildscharbV
vorgesehen.“
Caution:
There is risk of explosion if the battery is replaced by an
incorrect type. Dispose of used batteries according to the
instructions. Contact your local Kodak representative or refer to
r additional information on the
collection and recovery programs for batteries.
Achtung
om/go/recycle
für mehr
Informationen über das Sammeln und Wiederverwerten von
Batterien.