Using exposure metering – Kodak P850 User Manual

Page 46

Advertising
background image

39

www.kodak.com/go/support

Doing more with your camera

Using exposure metering

Choose a metering system in PASM or C1, C2, C3 mode for the appropriate lighting
of your subject.

NOTE: For rapid setting changes, see

page 40

.

Icon

Exposure metering options

Multi-Pattern (default)—evaluates the lighting conditions at various
points throughout the image to give an optimum picture exposure. Ideal for
general picture taking.

Center-Weighted—evaluates the brightness over a wide area with
emphasis on the center of the screen.

Center-Spot—similar to Center-weighted, except the metering is
concentrated on a smaller area of the subject centered in the viewfinder. Ideal
when you need an exact exposure of a specific area in the picture.

Selectable Zone—creates an exposure-metering setting from 1 of 25
selected screen locations. If used with Selectable Focus Zone (see

page 51

)

they track together. Use

to move the cross-hair graphic to the

desired zone.

Press OK or Set.

Press Exposure metering.
(Press again to exit.)

1

2

to highlight an option.

3

The active icon, except for the
default mode, is displayed in the
EVF/LCD screen.

Advertising