Kodak D1030 - Manual (Page 43)

Troubleshooting and support
www.kodak.com/go/support 37
Resetting the clock and calendar after losing power
If you turn off the power on the frame or otherwise lose power for half a day or more,
the clock and calendar return to the factory setting and the automatic on/off times, if
set, are disabled.
When you turn the frame back on, the set time and date screen appears.
1 Set the clock.
Tap the arrow lights or slide to select the current time.
2 Set the date.
Tap the down arrow to highlight Date, then tap the arrow lights or slide to select
the current date.
3 Tap the down arrow to highlight Save, then tap OK.
The time is reset and the automatic on/off times (if set) are re-enabled. It is not
necessary to reset the on/off times.
NOTE: If you exit the set time screen without setting the time, you can manually reset the clock and
re-enable the automatic on/off times ( see page 6 ). It is not necessary to reset the on/off times.