Important safety instructions, Upgrading your software and firmware – Kodak D1030 User Manual
Page 47
Appendix
www.kodak.com/go/support
41
Important safety instructions
CAUTION:
Do not disassemble this product; there are no user-serviceable
parts inside. Refer servicing to qualified service personnel.
KODAK AC Adapters and Battery Chargers are intended for indoor
use only. The use of controls, adjustments, or procedures other
than those specified herein may result in exposure to shock
and/or electrical or mechanical hazards. If the LCD breaks, do not
touch the glass or liquid. Contact Kodak customer support.
■
The use of an accessory that is not recommended by Kodak may cause fire, electric
shock, or injury. For approved accessories, visit
■
Use only the AC adapter that was packaged with your frame. Use of other AC
adapters may damage the frame and void your warranties.
■
When displayed with the stand extended, the frame rests at a 68 - 90
°
angle.
■
Do not place frame near open flame sources such as lighted candles or heaters.
■
Do not expose this product to liquid, moisture, or extreme temperatures.
Upgrading your software and firmware
Upgrade to the latest versions of the KODAK EASYSHARE Software and the frame
firmwa
for upgrading
firmware.
Size
(w/o faceplate)
D830: 25.3 x 20.2 x 3.5 cm (10 x 7.9 x 1.4 in.)
D1030: 32.9 x 25.3 x 3.5 cm (13 x 10 x 1.4 in.)
Weight
(w/o faceplate)
D830: 843 gm (1.9 lb.) includes frame, stand, and AC adapter
D1030: 1227 gm (2.6 lb.) includes frame, stand, and AC adapter
KODAK EASYSHARE D830/D1030 Digital Frames