Kodak ESP 7 - Manual (Page 24)

Printer Overview
16 www.kodak.com/go/aiosupport
a
If you acknowledge the error message by pressing OK , the light will go off. However, if the Wi-Fi
radio is not turned off and the printer cannot establish a connection to an existing Wi-Fi network,
the light will resume blinking, and the error message will display again.
Wi-Fi Status Light
Light Status Cause Action/Solution
Off This indicates that the Wi-Fi radio is
turned off and the printer is not
connected to a wireless network. None.
Blinks
continuously The Wi-Fi radio is turned on and the
printer is searching for available wireless
networks within range. None, unless you want to stop the
connection process. If so, turn the Wi-Fi
radio off.
Blinks
intermittently
The LCD
screen
displays an
error message
The Wi-Fi radio is turned on and:
• The printer cannot find any available
wireless networks within range.
or
• The Wi-Fi network connection has
been interrupted, or is too weak to
send signals to and from the printer.
Press OK to turn off the error message on the
LCD screen and then turn the Wi-Fi radio off.
Run the Wi-Fi Setup Wizard to find and
connect to an available wireless network
within range.
a
On The Wi-Fi radio is turned on and there is a
working connection between the printer
and a wireless network. None.