Kodak ESP 7 - Manual (Page 94)

Troubleshooting
86 www.kodak.com/go/aiosupport
Repositioning your computer away from these sources of signal interference
can improve your computer network performance. For example:
• Do place the AP/router in a central room.
• Do not place wireless entertainment devices between the AP/router and
wireless computer.
• Do not place wireless entertainment devices between the AP/router and
Wi-Fi All-in-One printer.
Probable Cause 3
The SSID is not visible because it is at the bottom of the list.
Corrective Action
Press to scroll to the bottom of the list. Infrastructure entries are listed first and
ad hoc entries last.
Probable Cause 4
The access point firmware needs updating.
Corrective Action
Check for firmware updates for your access point on the manufacturer's Web site.
Update the firmware on the access point.
Probable Cause 5
Your wireless adapter on your computer is not broadcasting the SSID (ad hoc).
Corrective Action
Verify that the wireless adapter is broadcasting the SSID. Print a network
configuration page from the All-in-One printer, and verify that the SSID for the
wireless adapter appears on the network configuration page. If the wireless adapter
is not broadcasting the SSID, see the documentation that came with your computer.
Probable Cause 6
The firmware for the wireless adapter on your computer needs updating (ad hoc).
Corrective Action
Check for firmware updates for your wireless adapter on the manufacturer's Web
site, and then update the firmware.
Probable Cause 7
An Ethernet cable is connected to the printer.
Corrective Action
Unplug the Ethernet cable.