AEG KO-LAVAMAT 72640 - Manual (Page 17)

Operating Instructions
17
Run a washing cycle
Brief instructions
A washing cycle is run in the following steps:
0 1. Set the correct washing program:
– Set the program and temperature with the program selector.
– Set any additional program(s).
2. If necessary, change the spin speed/select
o (RINSE HOLD).
3. Set the b (DELAY TIMER) if necessary.
4. Open the filling door and fill with washing.
5. Close the filling door.
6. Add the detergent/care agent.
7. Start the washing program with the O/s (START/PAUSE) button.
After the washing program ends:
Important! If the washing cycle ended with a rinse hold, perform
C (PUMP OUT), D (SPIN) or F (SHORT SPIN) before opening the filling
door.
8. Open the filling door and remove the washing.
9. Switch off the washing machine: Set the program selector to I (OFF).