AEG KO-LAVAMAT 72640 - Manual (Page 21)

Operating Instructions
21
Opening and closing the filling door
0 Open: Pull on the handle of the filling door.
0 Close: Press the filling door firmly closed.
The displays K (DOOR) and O/s (START/PAUSE) show
when the unit is switched on whether the filling door
can be opened.
3 If
– the display K (DOOR) flashes red,
– then the error code E40 flashes in the multi display,
– and the display
l (MAIN WASH) flashes,
an attempt was made to start a washing program without the filling
door being correctly closed. In this case, press the filling door firmly
closed and start the washing program again.
Add the washing
3 For the maximum filling quantities, see the "Program tables".
See "Sort and prepare washing" for information on correctly preparing
the washing.
0 1. Sort and prepare the washing according to type.
2. Open the filling door: Pull on the handle of the filling door.
3. Fill with washing.
Important! When closing the door, make
sure no items of washing get stuck! This
could damage textiles and the unit.
4. Close the filling door securely.
Display K (DOOR) Display O/s (START/PAUSE) Door opening possible?
lights up green flashes red Yes
lights up green lights up red
yes, after the O/s (START/
PAUSE) key is pressed
is off
flashes red
or lights up red
No
1)
1) Filling door is locked because of a high water level or high temperature