Kodak SPORT C135 - Manual (Page 54)

47 www.kodak.com/go/support
Troubleshooting
Computer/connectivity problems
Picture quality problems
Status Solution
Computer does not
communicate with
the camera ■ Turn off the camera, then turn it back on.
■ Make sure the batteries are charged and installed correctly ( see
page 3 ).
■ Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and directly to the computer (not
through a USB hub).
See page 7 . Then turn on the camera.
IMPORTANT: Use only the cable included with this camera!
■ See KODAK Software Help at www.kodak.com/go/camerasw .
Status Solution
Picture is not clear ■ Clean the lens ( see page 52 ).
■ Place the camera on a flat, steady surface or use a tripod (especially
in low light).
■ Use a larger picture size ( see page 34 ).
Picture is too dark ■ Adjust the Exposure Compensation ( see page 16 )
■ Reposition the camera for more available light.
■ Use Fill flash ( see page 13 ) or change your position so light is not
behind the subject.
■ Move so that the distance between you and the subject is within the
effective flash range (see Camera specifications starting on
page 50 ).
Picture is too light ■ Adjust the Exposure Compensation ( see page 16 )
■ Reposition the camera to reduce the amount of available light.
■ Turn the flash off ( see page 13 ).
■ Move so that the distance between you and the subject is within the
effective flash range (see Camera specifications starting on
page 50 ).