Altinex MT108-103 - Manual (Page 4)

MULTITASKER
400-0162-003 3
ABOUT YOUR MT108-103 2
MT108-103
1-In, 4-Out Balanced Stereo Audio DA
The MT108-103 is a Stereo, Audio Distribution
Amplifier Card that allows the connection of a
single stereo, audio source to four receiving
devices. All inputs and outputs are balanced,
allowing longer cable runs and superior noise
reduction.
As a “transparent” distribution amplifier, this card
utilizes AC coupling on its input for ideal signal
transfer characteristics. The power indicator on the
card doubles as a signal detection indicator,
allowing easy troubleshooting in complex
configurations. Each card requires only a single slot
in the MultiTasker enclosure.
The MT108-103 also has the ability to turn its
outputs on or off independently using RS-232
commands sent to the MultiTasker from a control
system or from the enclosure’s front panel keys.
TECHNICAL SPECIFICATIONS 3
Specifications are subject to change.
See
www.altinex.com for up-to-date information.
FEATURES/
DESCRIPTION
MT108-103
GENERAL
Inputs 1
Input Connectors 5-pin terminal block (1)
Outputs 4
Output Connectors 5-pin terminal block (4)
Compatibility Balanced Stereo Audio
Table 1. MT108-103 General
MECHANICAL MT108-103
Enclosure Slots Required 1
T° Operating 10°C-40°C
T° Storage 0 to 50°C
Humidity 90% non-condensing
MTBF (calc.) 40,000 hrs
Table 2. MT108-103 Mechanical
ELECTRICAL MT108-103
Audio Input
Impedance 10k
Ω
Coupling AC
Audio Throughput
Gain 0 dB ± 0.5 dB
Frequency Response 20Hz to 20kHz ± 0.5 dB
Audio Output
Level, Each Channel 1 Vp-p
Impedance 600
Ω
Power (from enclosure)
+6V 100 mA (0.6 W)
-6V 50 mA (0.3 W)
+13V 210 mA (2.7 W)
-13V 200 mA (2.6 W)
Total Power 6.2 W
Table 3. MT108-103 Electrical