Lenovo ThinkPad R50p - Manual (Page 117)

Table 35. Computer Configuration>Rescue and Recovery>Settings (continued)
Policy Setting Sub-Setting Description
Backup Backup SP USB Enable or disable ’Backup SP USB’
as an option. When enabled, the
system service partition can be
backed up to the USB drive.
Default: Disabled.
Backup Backup SP Network Enable or disable ’Backup SP
Network’ as an option. When
enabled, the system service
partition can be backed up to the
network. Default: Disabled.
Backup CPU Priority CPU Priority of backups. Values:
1-5 (1=Lowest Priority, 5=Highest
Priority). Default: 3.
Backup Yield ’Yield’ indicates amount of delay to
insert between disk writes during a
backup. This permits system
backups from hogging all of the
disk i/o bandwidth. Values: 0-8
(0=off, 8=least disk activity) Default:
0.
Backup Boot Disc Enable or disable the creation of a
’Boot Disc’ when backing up to
CD/DVD or creating an archive to
those media. Default: Enabled.
Backup VerifyDisc Enable or disable ’Verify Disc’ when
backing up to a CD/DVD or
creating an archive to those media.
Default: Enabled.
Backup Battery Percent
Required
’Battery Percent Required’ before
commencing a scheduled backup.
This policy ensures there is enough
battery power left to complete a
backup. Values: 0-100. Default: 0.
Backup Skip Locked Files Enable or disable ’Skip Locked
Files’ when backing up. If enabled,
locked files will be not be backed
up. Default: Disabled.
Backup Min Percent Free
Space
The minimum percent of free space
on the destination drive required
for backup. Values: 0-100. Default:
0.
Backup Protect With UUID Enable or disable the ’Protect With
UUID’ option. If enabled, this will
prevent the backups taken on one
machine from being restored on
another. Default: Disabled.
Backup Protect With
Password
Enable or disable the ’Protect With
Password’ option, if enabled,
backups may be protected with a
password. Default: Disabled.
Appendix A. Administrative tools 109