Lenovo ThinkPad R50p - Manual (Page 67)

Table 23. (continued)
Command Parameter Description Example
<Inclusions> <SizeCompare>
<Operand>
<Size>
<Dest>
<Operation>
where
v <SizeCompare> is
the optional
parameter to select
files based on their
size.
– <Operand> is
either LARGER
or SMALLER.
– <Size> is the file
size in MB.
v <Dest> is an
optional parameter
that specifies the
name of the
destination folder
on the target
system where the
files will be
written.
v <Operation> is an
optional parameter
that specifies how
the file path is to
be handled. Specify
either of the
following:
– P - preserves the
path of the file
and recreates
the file on the
target system
starting at the
location
specified by the
<Dest>
parameter.
– R - removes the
path of the file
and places the
file directly in
the location
specified by the
<Dest>
parameter.
Note: If the P or R
command is not
used in the
<Operation> tag,
the default is to
leave the
<Operation>
empty, for
example,
<Operation></
Operation>.
Example 2
<Inclusions>
<IncDescription>
<Descriptin>
C:\MyWorkFolder\*.*
</Decsription>
<DateCompare>
<Operand>
NEWER
</Operand>
<Date>07/31/2005</Date>
</DateCompare>
</IncDescription>
</Inclusions>
Example 3
<Inclusions>
<IncDescription>
<Description>
C:\MyWorkFolder/*.*
</Description>
<SizeCompare>
<Operand>
SMALLER
</Operand>
<Size>200</Size>
</SizeCompare>
</IncDescription>
</Inclusions>
Example 4
<Inclusions>
<IncDescription>
<Description>
C:\MyWorkFolder\*.*
</Description>
<Dest>
D:\MyNewWorkFolder
</Dest>
<Operation>
</Operation>
<IncDescription>
</Inclusions>
Chapter 4. Rejuvenation and migration 59