Changing setup values (continued) – Amphion M510 User Manual

Page 27

Advertising
background image

3D Processing

Reverb Mode:
3D PROCESSING MODE selection. There are 7 options
including "Concert, Living Room, Hall, Bathroom, Cave,
Arena, Church".

3D Processing

Changing setup values (continued)

Equalizer

EQ Type:
There are 7 types of EQ setting.You may select the
favorite sound effect depending on the playing disc.

Bass Boost:
Enable the "Bass Boost" function.

Super Bass:
Enable the "Super Bass" function.

Treble Boost :

This function only works when "Bass Boost" is on.

Enable the "Treble Boost" function.

Equalizer

26

Video Setup Page

S VIDEO:

Video Setup

Select this function to enter the following menu:

Set this function "on" to output the video signal on the
player to TV. During the period of TV CVBS output, the
screen of the player is blue. If you want to see the vi-
deo signal on the player again, just set this function"off".
Or, turn off the power and reset.

QUALITY:

TV CVBS

Set this function "on" to output the video signal on the
player to TV. During the period of S VIDEO output, the
screen of the player is blue.If you want to see the video
signal on the player again, just set this function"off".Or,
turn off the power and reset.

There are seven selective items in this function. They are Sh-
arpness, brightness, contrast, Gamma, Hue, Saturation and
Luma Delay. Press PLAY or "ENTER" to enter the selective
items and press or to select which item you want to set.
And then press or to set the value of the selected item.

Component

The primitive Component setup is Vga output. If the value of
Component is set to Off, there is no picture on the player.

If you want to see the picture on the player again,

just turn off the power and reset.

Advertising