Amphion M510 - Manual (Page 34)

CHAPTER8. (OTHERS)
Troubleshooting
If something seems to be wrong with your DVD player, first check the items in the table below.
General
The power does not turn on.
Connect the AC adapter correctly or insert the
battery pack correctly.
Check that POWER switch is not set to OFF.
The power can not be turned on by POWER button
of the remote control while the power switch is off.
The power automatically turns off.
In stop mode, the unit automatically enters the power
saving mode after 10 minutes when using with the AC
adapter, and using with the battery pack (Auto power
saving). Press POWER button of the remote control to
turn on the power again.
Buttons on the main unit or on the remote
control do not function.
In some discs, the operation may be prohibited.
Check that POWER switch is not set to OFF.
The unit does not work correctly.
Remove the AC adapter and the rechargeable
battery, then attach them again.
The unit is warmed during playback.
This is not a malfunction.
Sound and picture
No sound coming out from the connected
speakers.
Check if the connection is correct.
No picture appearing on the TV screen.
Check if the connection is correct.
Set the input switch on the TV set to "video".
Set the player INPUT/OUTPUT switch to "OUTPUT".
No picture appearing on the liquid crystal
display.
Check if the INPUT/OUTPUT switch of the player
is set to "OUTPUT" .
Pictures are distorted during forward / back-
ward search.
This is not a malfunction.
The liquid crystal display.
For the liquid crystal display of this unit, high quality
wide screen liquid crystal, composed of 230 thousand
pixels. Sometimes a few of pixels may appear black
or some other colors due to the property of the liquid
crystal parts, but this is not a malfunction.
Operations
Playback does not start by pressing (play).
Playback stops immediately.
The player is affected by condensation. Wait
approximately one or two hours.
If the disc is dirty, wipe it with a cleaning cloth.
Insert the disc correctly with the label side up.
Menu playback cannot be done in a video
CD.
Menu playback can be done only on a video CD
with PBC function.
Menu display is not in specified language.
Check "Disc Menu" of language in initial settings.
Subtitles are not displayed.
Subtitles are not displayed in a DVD in which
subtitles are not recorded.
If the subtitle is set to "OFF". Set it to "ON".
Audio /subtitle language can not be
changed.
It can not be changed on a disc that only one
language is recorded.
The menu display may be used to change the
language instead of the audio/subtitle change
operation.
33