Audiovox FPE1508 - Manual (Page 8)

E - 7
CONNECTIONS
CONNECTING A TV ANTENNA / CABLE / SATELLITE
To view television channels correctly, a signal must be received from one of the following sources:
- An indoor or outdoor aerial antenna
- A cable system
- A satellite system
CONNECTING AN A/V DEVICE
To connect to other equipment such as a VCR, camcorder, satellite system or cable, etc.
Connecting a Digital Antenna
The tuner in this TV receives ATSC TV signals from
an antenna.
This digital TV can receive standard (SDTV) and
high definition (HDTV) over the air broadcasts.
Connecting an Analog Antenna or
Device
The tuner in this TV receives NTSC TV signals,
analog cable signals or the RF output from a satellite
receiver, VCR or cable box.
C o n n e c t i n g t o a V C R /
Camcorder / Satellite System
/ Cable
Connect the AUDIO and S-VIDEO cable
(not included) as shown.
Make sure you connect the cable from
the other equipment (AUDIO OUT and
S-VIDEO OUT
) to this unit (AUDIO IN
and S-VIDEO IN).
NOTE
Please refer to the user manual for the
other equipment for more information.
Satellite, cable or TV antenna
cable to TV ANTENNA terminal
(cable not included)
TV ANTENNA
To AUDIO IN jacks
( AV IN)
To S-VIDEO jack
To S-VIDEO OUT / AUDIO OUT jacks
VCR / CAMCORDER /
SATELLITE SYSTEM /
CABLE, etc.
16159S2_UL_ENGLISH IB.indd 7 1/9/2008 2:13:28 PM