Lenovo ThinkServer TD200 - Manual (Page 97)

nsc (Adapter configuration [network and security])
ac (Adapter configuration [advanced])
Example
system> users
1. USERID Read/Write
Password Expires: no expiration
2. manu Read Only
Password Expires: no expiration
3. eliflippen Read Only
Password Expires: no expiration
4.
<not used>
5. jacobyackenovic custom:cel|ac
Password Expires: no expiration
system> users -7 -n sptest -p PASSW0RD -a custom:am|rca|cel|nsc|ac
ok
system> users
1. USERID
Read/Write
Password Expires: no expiration
2. test
Read/Write
Password Expires: no expiration
3. test2
Read/Write
Password Expires: no expiration
4. <not used>
5. jacobyackenovic custom:cel|ac
Password Expires: no expiration
6. <not used>
7. sptest
custom:am|rca|cel|nsc|ac
Password Expires: no expiration
8. <not used>
9. <not used>
10. <not used>
11. <not used>
12. <not used>
system>
IMM control commands
The IMM control commands are as follows:
v clearcfg
v clock
v identify
v resetsp
v update
clearcfg command
Description
Use the clearcfg command to set the IMM configuration to its factory defaults. You
must have at least Advanced Adapter Configuration authority to issue this
command. After the configuration of the IMM is cleared, the IMM is restarted.
Chapter 7. Command-line interface 91