Lenovo ThinkPad 10 - Manual (Page 32)

2. Insert the card into the slot as shown.
If the plug-and-play feature is not enabled for the installed smart card, do the following to enable the feature:
1. Go to Control Panel.
2. Tap Hardware and Sound.
3. Tap Device Manager. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
4. From the Action menu, tap Add legacy hardware. The Add Hardware Wizard starts.
5. Follow the instructions on the screen.
Removing a smart card
Attention:
• Before removing a smart card, stop the card first. Otherwise, data on the card might be damaged or lost.
• Do not remove the smart card while the tablet is in sleep mode or hibernation mode. Otherwise, the
system might not respond when you try to resume operation.
To remove a smart card, do the following:
1. Tap the triangular icon on the taskbar to show hidden icons. Then, tap and hold the Safely Remove
Hardware and Eject Media icon.
2. Tap the item you want to remove to stop the card.
3. Pull the card outward a little, and gently slide the card out of the slot.
24 User Guide