Alpine CDA-7897 - Manual (Page 18)

16
-EN
Erasing Disc Title/Station Title
1
Press the TITLE button to select the titling mode. Then,
press and hold for at least 3 seconds.
2
Press and hold the -/J button for at least 2 seconds
to activate the title scanning mode. The title in the
display will blink.
3
Press the g DN or f UP button repeatedly until
the title you want to erase is displayed.
4
Press and hold the -/J button for at least 2 seconds
to erase the title displayed.
5
Press the TITLE button to cancel the title erasing
mode.
NOTE
You cannot erase CD-TEXT.
Basic Operation
-/J
g DN f UP
TITLE DISP
Switching the Display Modes
You can select the display pattern mode from ten display
patterns (six display patterns for CDA-7897). You can
also deactivate the display.
1
Press the DISP(DISPLAY) button to select the desired
Display pattern mode.
Each press changes the display patterns
< CDA-7998 >
NOTE
* Pattern 10 displays Pattern 1 to Pattern 9 repeatedly.
< CDA-7897 >
NOTE
∗ Pattern 6 displays Pattern 1 to Pattern 3 repeatedly.
→ Pattern1 → Pattern2 → Pattern3 → Pattern4 → Pattern5
Pattern10∗
← Pattern9 ← Pattern8 ← Pattern7 ← Pattern6 ←
→ Pattern1 → Pattern2 → Pattern3 → Pattern4
Pattern6∗
← Pattern5(Silent mode) ←