Alpine CDA-7897 - Manual (Page 19)

17
-EN
Switching the Tuner Mode
The CDA-7998/CDA-7897 incorporates the MAX TUNE
SQ for the highest quality tuner audio. Moreover, you
can choose between 3 settings to suit your own
personal sound preferences and usage.
1
Press and hold the SETUP button for at least 3 seconds.
2
Press the f UP or g DN button to select
"TUNER" mode.
3
Press the BAND button to switch the TUNER mode.
NORMAL : Standard setting
Hi-Fi
: Sound quality priority setting
STABLE : Noiseless priority setting
NOTES
• The initial setting at the factory is "NORMAL."
• If you find the sound is very noisy while listening to the tuner
in the Hi-Fi mode, we recommend you change to the
NORMAL mode.
4
When the setting is completed, press the SETUP
button to return to the normal mode.
NOTE
"MP3 File Selection" and "Playing MP3 data" in the "SETUP"
mode section are described in MP3 Operation on page 28.
Changing Lighting Color
(CDA-7998 only)
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP or g DN button to select
“AMBER”.
3
Press the BAND button to toggle the mode between
AMBER ON (amber) and AMBER OFF (green).
4
Press the SETUP button to set the selected mode.
NOTE
The initial setting at the factory is "AMBER OFF."
Dimmer Control (CDA-7897 only)
Set the DIMMER control to AUTO to decrease the
illumination brightness of the unit with the head lights of
the vehicle ON. This mode is useful if you feel the unit's
backlighting is too bright at night.
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP or g DN button to select the DIM
(DIMMER) mode.
3
Press the BAND button to select the Dimmer mode.
Each press toggles between DIM AUTO and DIM
MANUAL.
4
Press the SETUP button to activate the normal mode.
NOTE
The initial setting at the factory is "DIM AUTO."
Subwoofer On and Off
1
Press and hold the SETUP button for at least 3
seconds.
2
Press the f UP or g DN button to select the
Subwoofer mode.
3
Press the BAND button to toggle mode between
ON and OFF.
NOTE
The initial setting at the factory is subwoofer ON.
4
Press the SETUP button after setting the Subwoofer
ON.
5
Press the MODE button repeatedly to select the
Subwoofer mode.
Press the g DN or f UP button after selecting the
Subwoofer mode, and the subwoofer output phase is
toggled “NORMAL (PHASE 0
°)” or “REVERS (PHASE
180
°)”.
6
Turn Rotary encoder until the desired sound is
obtained in each mode.
SETUP Operation
f UP g DN
BAND
SETUP
MODE
Rotary encoder
→ Subwoofer → BALANCE
VOLUME
← DEFEAT ← FADER ←
→ NORMAL → Hi-Fi → STABLE