ATEN ATEN MasterView KVM CS-62 - Manual (Page 9)

Operation
The CS-62 Petite KVM Switch uses hotkey combinations to
provide KVM focus to the computers. The hotkey combinations
allow you to:
M Select the Active Port
M Invoke Auto Scan Mode
M Set the Auto Scan Time Interval
Selecting the Active Port
You can toggle the KVM focus between the two computers by
pressing and releasing the Scroll Lock key twice:
[Scroll Lock]+[Scroll Lock].
Auto Scan Mode
The CS-62’s Auto Scan feature automatically toggles the KVM
focus between the two computers at regular intervals so that
you can monitor their activity without having to take the trouble
of switching manually. The default time interval is 5 seconds.
To invoke Auto Scan Mode:
Press and release the Left Shift key; then press and release the
Right Shift key:
[Left Shift] [Right Shift]
Once scanning begins, it continues until you press the
[Spacebar] to exit Auto Scan Mode. The port that was currently
active at the time scanning stopped remains active.
Note: While Auto Scan Mode is in effect, ordinary keyboard
and mouse functions are suspended. You must exit Auto
Scan Mode by pressing the [Spacebar] in order to regain
normal control of their use.
- 7 -
2003-06-20