Lenovo S5000 Tablet - Manual (Page 47)

Lenovo S5000
43
1100 USB sub board assembly
For access, remove the following FRUs in order:
• “1010 SIM card holder” on page 28
• “1020 Rear cover and side key” on page 29
• “1030 SIM sub board” on page 31
• “1050 Rear frame” on page 35
• “1080 Antenna assembly” on page 40
• “1090 RF cables” on page 41
1. Detach the vibrator motor from its seat using a thin flat blade.
Figure 10-1. Detaching the vibrator motor
Important notices for handling PCB:
When handling PCB, bear the following in mind:
• Be careful not to drop the PCB onto a bench top that has a hard surface,
such as surface made of metal, wood, or composite materials.
• Avoid rough handling of any kind.
• Make sure not to drop or stack the PCB in the whole process.
• Make sure to put the PCB only on surface covered with such materials as
an ESD mat or conductive corrugated plate.