Lenovo S5000 Tablet - Manual (Page 49)

Lenovo S5000
45
1110 Main PCBA
For access, remove the following FRUs in order:
• “1010 SIM card holder” on page 28
• “1020 Rear cover and side key” on page 29
• “1030 SIM sub board” on page 31
• “1040 Speaker box” on page 33
• “1050 Rear frame” on page 35
• “1060 Main camera and sub camera” on page 37
• “1070 Battery FPC connector holder” on page 39
• “1080 Antenna assembly” on page 40
• “1090 RF cables” on page 41
1. Remove 2 screws fixing the main PCBA to the main body.
Figure 11-1. Screws on the main PCBA
Important notices for handling PCB:
When handling PCB, bear the following in mind:
• Be careful not to drop the PCB onto a bench top that has a hard surface,
such as surface made of metal, wood, or composite materials.
• Avoid rough handling of any kind.
• Make sure not to drop or stack the PCB in the whole process.
• Make sure to put the PCB only on surface covered with such materials as
an ESD mat or conductive corrugated plate.
a