Lenovo ThinkPad 8 - Manual (Page 59)

• “1050 System board” on page 44
• “1060 Audio-card cable” on page 45
• “1070 Audio card” on page 46
• “1080 Touch-sensor-card support bracket” on page 46
• “1100 Display cable” on page 49
• “1110 Touch-sensor cable” on page 49
• “1130 Built-in battery” on page 51
• “1140 System-board support bracket” on page 52
Removal steps of the wireless-WAN antenna assembly
Note: The wireless-WAN antenna assembly is only available on some models.
1
1
2
2
Cable routing: When you install the antenna assembly, route the cables as shown in the following
illustration. Ensure that the cables are not subject to any tension. Tension could cause the cables to be
damaged by the cable guides, or a wire to be broken.
Chapter 7 . Removing or replacing a FRU 53