Airlink101 AR670W User Manual
Page 4
Advertising
Step 5
Type
ipconfig/renew and press Enter. You should get an IP address of 192.168.1.x
(where x is a number between 2 - 254). Proceed to Section 3, Configuring the Router. If
you don’t get an IP address, reset the router by holding in the reset button on the back of the
router for 10 seconds while it is ON and try ipconfig/renew again.
Step 6
For Windows 95/98/ME go to
Start, Run, type winipcfg and click OK. (Not
necessary for Windows 2000/XP Users)
Step 7
Select your network card from the drop-down menu and click
Release.
Advertising