Airlink101 AR670W User Manual
Page 9
Section 5 (Optional)
Wi-Fi Protected Setup
Wi-Fi Protected Setup™ (WPS) is a new and easy way to configure the encryption for your
wireless network clients. In order to use it with your router, firstly, you must configure the
wireless encryption on the router. You can find instructions for configuring it in the User Manual
located on the CD that came with your router. Secondly, you will need to have wireless
adapters that support this feature. If your wireless adapters do not support WPS, you will need
to set up the wireless security manually and you can skip this section.
In the instructions below, we are going to use the utility, Wireless Monitor that comes with the
Airlink101 300N or 150N Wireless Adapters (AWLC6070, AWLC6080, AWLH6070,
AWLH6080, AWLL6070, and AWLL6080) as the example.
Step 1
Go to the computer with the Airlink101 150N wireless adapter and open the Wireless
Monitor. Under AP List, click on the wireless network you want to connect to and click on the
WPS Connect button.
Note: If you do not see the WPS Connect button, you can go to www.airlink101.com to
download the latest utility and driver.