Asus Terminator 2 Barebone System T2-AH1 - Manual (Page 60)

3 - 1 4 3 - 1 4 3 - 1 4 3 - 1 4 3 - 1 4 C h a p t e r 3 : S t a r t i n g u p C h a p t e r 3 : S t a r t i n g u p C h a p t e r 3 : S t a r t i n g u p C h a p t e r 3 : S t a r t i n g u p C h a p t e r 3 : S t a r t i n g u p
3. Click the R u n R u n R u n R u n R u n button to perform a cable test.
3.4.4 3.4.4 3.4.4 3.4.4 3.4.4 Marvell Marvell Marvell Marvell Marvell ® ® ® ® ® Yukon Virtual Cable Tester Yukon Virtual Cable Tester Yukon Virtual Cable Tester Yukon Virtual Cable Tester Yukon Virtual Cable Tester
The Marvell ® Virtual Cable Tester™ (VCT) is a cable diagnostic utility that
reports LAN cable faults and shorts using the Time Domain Reflectometry
(TDR) technology. The VCT detects and reports open and shorted cables,
impedance mismatches, pair swaps, pair polarity problems, and pair skew
problems of up to 64 ns at one meter accuracy.
The VCT feature reduces networking and support costs through a highly
manageable and controlled network system. This utility can be incorporated
in the network systems sofware for ideal field support as well as
development diagnostics.
Using the Virtual Cable Tester™ Using the Virtual Cable Tester™ Using the Virtual Cable Tester™ Using the Virtual Cable Tester™ Using the Virtual Cable Tester™
To use the the Marvell ® Virtual Cable Tester™ utility:
1. Launch the VCT utility from the Windows ® desktop by clicking
S t a r t > A l l P r o g r a m s > M a r v e l l > V i r t u a l C a b l e T e s t e r S t a r t > A l l P r o g r a m s > M a r v e l l > V i r t u a l C a b l e T e s t e r S t a r t > A l l P r o g r a m s > M a r v e l l > V i r t u a l C a b l e T e s t e r S t a r t > A l l P r o g r a m s > M a r v e l l > V i r t u a l C a b l e T e s t e r S t a r t > A l l P r o g r a m s > M a r v e l l > V i r t u a l C a b l e T e s t e r.
2. Click V i r t u a l C a b l e T e s t e r V i r t u a l C a b l e T e s t e r V i r t u a l C a b l e T e s t e r V i r t u a l C a b l e T e s t e r V i r t u a l C a b l e T e s t e r from the menu to display the screen
below.
• The VCT only runs on systems with Windows ® XP or Windows ® 2000
operating systems.
• The VCT utility only tests Ethernet cables connected to Gigabit LAN
port(s).
• The R u n R u n R u n R u n R u n button on the Virtual Cable Tester™ main window is
disabled if no problem is detected on the LAN cable(s) connected to
the LAN port(s).
• If you want the system to check the status of the LAN cable before
entering the OS, enable the item P o s t C h e c k L A N C a b l e
P o s t C h e c k L A N C a b l e P o s t C h e c k L A N C a b l e P o s t C h e c k L A N C a b l e P o s t C h e c k L A N C a b l e in the
BIOS Setup.