4 pathtrace reverse transmission, Pathtrace reverse transmission, Hub ran – ADC 75-192 User Manual

Page 32: Figure 9. tracing pathtrace, two tenants

Advertising
background image

ADCP-75-192 • Issue 2 • June 2007

Page 20
© 2007, ADC Telecommunications, Inc.

In each of the simulcasted RANs, the RUC module receives the pathtrace string into its FPGA
from one of its two DIF input connections. The RUC HCP then reports the received pathtrace
strings in its MIB for use by tenant processing and other higher-level processes.

Figure 9. Tracing Pathtrace, Two Tenants

2.4.4

Pathtrace Reverse Transmission

The RDC is the originator of the pathtrace string in the reverse paths of the system. However, it
is desirable to maintain continuity between the forward and reverse pathtrace strings. To
manage this, the Pathtrace Process that runs in the RAN CPUs is responsible for reading
pathtrace strings from the RUC MIB, parsing out the Tenant ID sub-strings from the pathtrace
strings, and writing the Tenant IDs into the MIBs of the RDCs that are associated with the
RUCs.

The RDC HCP creates up to two new pathtrace strings (primary/diversity(if present)) starting
with the Tenant ID that was provided in its MIB by the Pathtrace Process. The RDC HCP
appends its own CPU IP Address to the pathtrace strings, and then appends the primary/
diversity flags (“P” or “D”). Finally, the RDC transmits the pathtrace strings out on up to two
outputs. The pathtrace strings are then transmitted back to the Hub reverse modules belonging
to this tenant.

FSC

T1

RSC

T1

HDC 1

T1

HDC 2

T1

HUC

T1

1

5

6

P

P

D

D

BIM

T1

P

D

10

9

FSC

T2

RSC

T2

HDC 1

T2

RUC

T1/T2

RDC

T1

P

D

RDC

T2

HDC 2

T2

HUC

T2

3

7

8

P

P

D

D

BIM

T2

P

D

10

9

MUX

ADD 3

MUX

ADD 4

DROP 1

DROP 2

DROP 3

DROP 4

DROP 3

DROP 4

FIC
SIF

FIC
SIF

Operator setup at

hubmaster through

BTS Connection MIB.

Set at node level by

HUB RF Connection MIB.

PATH TRACE CONTENTS

Tenant,BTS#,sector,band,IP_of_FSC
Tenant,BTS#,sector,band,IP_of_RDC,P
Tenant,BTS#,sector,band,IP_of_RDC,D

LEGEND

ADD ‘n’

DROP ‘x’

DROP ‘n’
ADD ‘x’

P

D

ADD 1

ADD 2

ADD 3

ADD 4

P.T.

HLP

Digital Rear I/O port
RF SMA (no PT)
DIF, Tenant 2
DIF, Tenant 1
Set by Software
Optical link

7

21947-A

HUB

RAN

Advertising