ATEN CS-1708 - Manual (Page 32)

CS-1708 / CS-1716 User Manual
24
(Continued from previous page.)
(Continues on next page.)
Setting Function
EDIT PORT
NAMES To help remember which computer is attached to a particular port,
every port can be given a name. This function allows the
Administrator to create, modify, or delete port names.
Note: Only the Ports currently chosen for the LIST view on the
main OSD screen (see F2 LIST, page 20), show up here.
To Edit a port name:
1. Use the Navigation Keys to move the highlight bar to it, then
press [Enter].
2. Key in the new Port Name, or modify/delete the old one. The
maximum number of characters allowed for the Port Name is
12. Legal characters include:
Š
All alpha characters: a - z; A - Z
Š
All numeric characters: 0 - 9
Š
+ - / : . % ( ) [ ] ' ? and Space
Case does not matter; OSD displays the Port Name in all
capitals no matter how they were keyed in.
3. When you have finished editing, press [Enter] to have the
change take effect. To abort the change, press [Esc].
RESTORE
DEFAULT
VALUES This function is used to undo all changes and return the setup to
the original factory default settings. (Except for the Names that
were assigned to the Ports. The names are kept.)
CLEAR THE
NAME LIST This function is similar to Restore Default Values. The difference is
that it also clears the Port Names along with undoing all changes
and returning the setup to the original factory default settings.
ACTIVATE
BEEPER Choices are Y (for On), or N (for Off). When activated, the beeper
sounds whenever a Port is changed; when activating the Auto
Scan function (see F7 SCAN, page 29); or an invalid entry is made
on an OSD menu. The default is Y.
cs1708-1716.book Page 24 Thursday, July 19, 2007 3:06 PM