ATEN CS-1708 - Manual (Page 28)

CS-1708 / CS-1716 User Manual
20
F1 GOTO
GOTO allows you to switch directly to a port either by keying in the port's
Name, or its Port ID.
Š To use the Name method, key in 1; key in the port's Name; then press
[Enter].
Š To use the Port ID method, key in 2; key in the Port ID; then press
[Enter].
Note: You can key in a partial Name or Port ID. In that case, the screen will
show all the computers that the User has View rights to (see SET
ACCESSIBLE PORTS, page 25), that match the Name or Port ID
pattern, regardless of the current List settings (see F2 LIST, for details).
To return to the OSD Main Screen without making a choice, press [Esc].
F2 LIST
The LIST function lets you broaden or narrow the scope of which ports the
OSD displays (lists) on the Main Screen.
Many of the OSD functions only operate on the computers that have been
selected for listing on the Main Screen with this function. The choices and their
meanings are given in the table below:
* These items only show up on the Administrator's screen, since only he has
Quick View setting rights ( see SET QUICK VIEW PORTS , page 25, for details).
Move the Highlight Bar to the choice you want, then press [Enter]. An icon
appears before the choice to indicate that it is the currently selected one.
After you make your choice and press [Enter], you return to the OSD Main
Screen with the newly formulated List displayed.
Choice Meaning
ALL Lists all of the ports on the installation.
QUICK VIEW* Lists only the ports that have been selected as Quick View Ports
(see SET QUICK VIEW PORTS, page 25).
POWERED ON Lists only the ports that have their attached computers Powered
On.
QUICK VIEW +
POWERED ON* Lists only the ports that have been selected as Quick View Ports
(see SET QUICK VIEW PORTS, page 25), and that have their
attached computers Powered On.
cs1708-1716.book Page 20 Thursday, July 19, 2007 3:06 PM