ATS Handheld Inductive Loop Tester HILT 9000 - Manual (Page 14)

13
HILT 9000 - Inductive Loop Tester
Repair and Calibration
To ensure that your instrument meets factory specifications, we
recommend that it be returned to our factory at one-year
intervals for calibration service. In addition to calibration of the
test parameters, this service includes replacement of batteries
and firmware updates. Please contact the factory for price and
scheduling information on this service.
Request a Return Merchandise Form by phone or by fax from
our Service Department (or complete the form on our website at
www.atsi-tester.com), then return the tester along with the
completed RM Form. Return the tester, postage or shipment
pre-paid to:
ATSI
8157 US Route 50 • Athens, OH 45701
(740) 592-2874
(740) 594-2875 - Fax
[email protected]
Caution: To protect yourself against in-transit loss, we recom-
mend you insure your returned materials.
The HILT -9000 is sold with a one-year limited warranty to the
original purchaser, as defined by the limited warranty on the
inside back cover of this manual. No other warranties, expressed
or implied, apply to the HILT -9000 or associated components.
After the first year, ATSI will continue to provide repairs to the
tester on a parts-plus-labor basis. A phone call describing the
problem may allow ATSI to make a nonbinding estimate of repair
costs, but the surest approach is to send back the tester for a
comprehensive evaluation and a binding repair estimate.