Ampro Corporation LITTLE BOARD 5001451A - Manual (Page 71)

Little Board P6d Module
2-53
Video
Specify the initial video mode. Select Mono, CGA40, CGA80, or EGA/VGA. If your video display
card is VGA, super VGA, or any other high resolution standard, specify EGA/VGA no matter how it
is configured to come up.
Error Halt
Select which kinds of errors will halt the Power-On Self Test (POST). If you plan to use the module
without a keyboard, be sure to set this option to not halt on keyboard error.
DRAM Memory
The ROM BIOS automatically detects the amount of memory during POST and stores the result
when you save the configuration values when exiting Setup. This Setup page displays the amount
of memory found in the system.
Setup 3 — BIOS Features Setup
Use Setup 3 to set a variety of BIOS feature options. Figure 2-9 shows what can be configured on
Setup 3, and the sections that follow describe each parameter.
BIOS FEATURES Setup
Ampro Computers, Inc.
Video BIOS Shadow : Enabled
Serial Console : Disabled
Serial Boot Loader : Disabled
Virus Warning : Disabled
CPU Internal Cache : Enabled
External Cache : Disabled
Quick Power On Self Test : Disabled
Boot Sequence : A,C,SCSI
Swap Floppy Drive : Disabled
Boot Up Floppy Seek : Enabled
Boot Up Numlock Status : Off
Gate A20 Option : Fast
Typematic Rate Setting : Disabled
Typematic Rate (chars/Sec) : 6
Typematic Delay(Msec) : 250
PS/2 mouse function : Disabled
PCI/VGA Palette Snoop : Disabled
OS Select for DRAM >64MB : Non-OS2
Report No FDD For WIN 95 : Yes
Watchdog Timer : Disabled
ESC:Quit
↑ ↓ → ←
: Select
Item
F1 :Help PU/PD/+/- : Modify
F5 :Old Values (Shift)F2:Color
F6 :Load BIOS Defaults
F7 :Load Setup Defaults
Figure 2-9. Setup 3 — BIOS Features Setup
This Setup screen allows you to configure the following parameters:
! VIRUS WARNING – default is disabled. Virus Warning monitors for writes to the hard disk
boot sector. It will display the following warning message, beep the speaker and wait for user
confirmation.