Ameriphone DIALOGUE VCO - Manual (Page 19)

To Playback Recorded Messages:
1. The screen will indicate the
number of messages you have
received.
2. Press 1 to read your messages.
Or press 1 again to fast forward
to the next message. When
finished, press 2 to erase
messages.
3. Press 3 to turn off the answering
machine.
Programming your Password (for
remote message retrieval only):
For security, you can set up a personalized
password to protect the privacy of the
messages left on your VCO answering
machine.
1. Lift handset and press AUTO
ANS .
2. Press 4.
3. Type your password after the
" / " by following the typing
procedures.
4. When complete, press SELECT
to return to auto answering
mode.
5. When you retrieve your messages
remotely, you must enter your
password exactly. See section below.
Retrieving Messages Remotely:
1. Call your Dialogue VCO from a
text telephone, another Dialogue
VCO, or a TTY/ TDD pay phone.
2. When your Dialogue VCO
answers, you will see the
greeting message.
3. Type a backslash “ / ”, and your
password if you've set one up.
Then press the space bar or
return key.
4. Your messages will scroll on the
TTY screen.
5. At the end of the messages,
“ERASE MSG? Y/N” appears,
followed by “REPEAT MSGS?
Y/N”. Type “Y” for yes and “N”
for no.
Using an External Voice Answering
Machine
The Dialogue VCO text answering
machine will not work in conjunction with
any voice answering machine. Do not
hook an external voice answering
machine to your Dialogue VCO because it
will interfere with the internal text answer-
ing machine.
Special Features
(Continued)
17